Product Overview

Mshine Marble Pads are diamond floor maintenance pads designed for the progressive restoration and polishing of marble floors. The available grit range runs from 50# to 3000#, covering initial wet grinding, scratch refinement, pre-polishing and final mechanical polishing.

The supplied process uses water rather than chemical polishing powders. Progressive diamond stages remove and refine scratches instead of temporarily filling them with polishing powders, helping to produce a cleaner, smoother and more reflective surface.

Key Benefits

• Full grit range from 50# to 3000# for staged marble floor restoration.
• Suitable for wet grinding, fine grinding and mechanical polishing.
• Helps level minor unevenness at floor joints and refine visible scratches.
• Uses water throughout the described restoration process.
• Avoids chemical polishing residue, simplifying post-work cleaning.
• Produces a high-gloss, reflective finish when used through the progressive grit stages.

Applications

The pads are intended for professional marble floor restoration and maintenance, including:

• Refining scratches and worn areas.
• Levelling minor unevenness around floor joints.
• Deep cleaning and fine surface refinement.
• Preparing marble for final polishing.
• Restoring gloss through mechanical polishing.

Example Staged Process

The supplied application process uses a single-disc floor machine and water through the following stages:

50#, 100# and 200# – Floor Restoration

Used for wet grinding to help level minor unevenness at floor joints, flatten the surface and repair visible scratches around joint edges.

400# and 800# – Fine Grinding and Pre-Polishing

Applied with clean water to remove embedded dirt and residual contamination while refining fine scratches. These stages prepare a cleaner, more uniform surface for final polishing.

1500# and 3000# – Mechanical Polishing

Used for the final polishing stages to create a smoother, brighter and more reflective finish.

Technical Information

• Product type: Diamond floor maintenance pads
• Intended surface: Marble floors
• Available grit range: 50# to 3000#
• Application: Progressive wet grinding, refinement and polishing
• Process medium: Water
• Reported finish: 88–110 gloss units (GU) and 90–99 distinctness of image (DOI)

Choosing the Right Grit

• 50#–200#: Initial restoration, surface levelling and visible scratch removal.
• 400#–800#: Fine grinding, cleaning and pre-polishing.
• 1500#–3000#: Final mechanical polishing and gloss development.

Important Notes

The supplied information describes use with a single-disc floor machine but does not specify pad diameter, attachment type, machine speed or individual machine compatibility. Confirm that the selected pad option is suitable for your equipment before ordering.

Frequently Asked Questions

Which floors are Mshine Marble Pads intended for?

They are specified for the professional restoration and polishing of marble floors. No broader surface compatibility list has been supplied.

Are the pads used wet or dry?

The supplied restoration process uses the pads wet with water through the grinding, refinement and polishing stages.

Which grits are used for scratch removal?

The described process uses 50#, 100# and 200# pads for initial restoration, minor levelling and visible scratch refinement. The appropriate starting grit will depend on the condition of the floor.

Which grits are used for final polishing?

The supplied process uses 1500# and 3000# pads for final mechanical polishing and gloss development.

Can these pads be used with a single-disc floor machine?

A single-disc floor machine was used in the supplied application process. As no diameter, drive system or operating-speed requirements are provided, compatibility should be confirmed for the specific machine.