Product Overview

Shine Repair Light is a water‑based polishing cream specifically formulated for light‑toned glazed polished and light‑toned full‑body polished porcelain tiles. It increases surface sheen, reduces the appearance of light scratches and abrasions, and helps improve resistance to dirt.

Key Benefits

• Specifically developed for light‑toned glazed and full‑body polished porcelain tiles
• Enhances surface shine and reduces dull areas
• Minimises the visibility of light scratches and abrasions
• Improves surface resistance to dirt

Applications

Suitable for both indoor and outdoor applications on light‑toned glazed polished and light‑toned full‑body polished porcelain tiles. Ideal for contractors restoring sheen on polished porcelain floors and surfaces.

Suitable Surfaces

• Light‑toned glazed polished porcelain ceramic tiles
• Light‑toned full‑body polished porcelain ceramic tiles

How to Use

• Carry out a preliminary test on an unexposed area or spare tile to confirm suitability.
• Prepare the surface: remove loose debris, dust and coarse dirt (broom or vacuum). If heavily soiled, clean first with a suitable degreaser and allow the surface to dry completely.
• Protect adjacent areas not to be treated. Apply only to surfaces between +5°C and +40°C.
• Shake the bottle for about 30 seconds before use. Pour a few drops onto the area to be treated.
• Work the product in circular motions with a white pad mounted on a single‑disk machine or with a hand polisher. Apply firm, even pressure and work until the product is completely dry.
• Assess results and reapply if necessary. Depending on the case, up to 10 applications may be performed.
• After treatment, remove residues and rinse the surface with water. Once residues are removed and rinsed, the floor can be opened to foot traffic.

Equipment

• White pad
• Single‑disk machine or hand polisher

Maintenance

After use, maintain surface cleanliness with a compatible floor cleaner. Clean application equipment with water.

Important Notes

• Do not apply to matt or natural‑finish porcelain tiles.
• Do not apply to surfaces that are not fully clean, or to wet or heated surfaces.
• Do not apply to surfaces that are not light‑toned.
• Always perform a preliminary test to verify suitability before full application.

Frequently Asked Questions

Which surfaces are suitable for Shine Repair Light?

It is suitable for light‑toned glazed polished porcelain ceramic tiles and light‑toned full‑body polished porcelain tiles (indoor and outdoor).

Can I use this product on dark or matt porcelain?

No. The product is formulated for light‑toned polished porcelain and should not be used on matt or natural‑finish porcelain or on surfaces that are not light‑toned.

What equipment should I use?

Use a white pad with a single‑disk machine or a hand polisher. Work the product in circular motions and apply consistent pressure until the product dries.

How many applications are required?

Apply once and assess the result. The technical data sheet notes that, depending on the situation, up to 10 applications can be performed. Always test first and reapply only as needed.